You are here

MicroTik hAPac Lite

11 posts / 0 new
Last post
N6GKJ
N6GKJ's picture
MicroTik hAPac Lite
Hello Guys!

I have converted 2 of the  hAPac Lite units and they seem to work. I get 54Mb/s on my link between the two of them. I am running 20MHz chan width.
is this normal for these units?

73,
Ron
nc8q
nc8q's picture
MikroTik RouterBOARD 952Ui
MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite)
Hi, Ron:
A TxMbps of 54.0 is odd.
If you ssh into the node and issue
iw wlan0 station dump
more information will be returned.
If you are using 20 MHz bandwidth and 2 GHz channels,
you should get up to 130.0/144.4 TxMbps.
If your LQ/NLQ is 100%, a TxMbps of 54.0 should not be displayed.
58.5 maybe, but not 54.0.
:-|
73, Chuck

 
N6GKJ
N6GKJ's picture
Hap ac lite speeds
Chuck,
I am running on 5ghz chan 158 may be 30 feet apart. one node in the house one in the garage in the network rack. I ttok your advice and am moving everything to 5GHz
 
nc8q
nc8q's picture
MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite) 5 GHz Node?

MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite)

Hi, Ron:

My hAP-line does not offer 5 GHz AREDN channels.
I see only 5 GHz Access Point or Client.
What firmware are you running?

None of my '5ac' devices link at 802.11n/ac speeds.
(LHG-5ac-XL, SXTsq-5ac, hAP-5-ac3)
They all link at 802.11a/g speeds; Maxmimum 54 TxMbps. Weird.

73, Chuck
Edited 12/14/2023: added line feeds for easier reading. :-|
 

KD1HA
KD1HA's picture
Chuck, they do now if you
Chuck, they do now if you look close at the Basic setup you will see Band under Mesh is a drop down menu.
N6GKJ
N6GKJ's picture
root@N6GKJ-Site3:~# iw wlan0
root@N6GKJ-Site3:~# iw wlan0 station dump
Station 18:fd:74:49:01:d9 (on wlan0)
        inactive time:  10 ms
        rx bytes:       48573498
        rx packets:     277631
        tx bytes:       2558911
        tx packets:     13208
        tx retries:     0
        tx failed:      92
        rx drop misc:   62
        signal:         -54 [-54, -73] dBm
        signal avg:     -52 [-53, -73] dBm
        tx bitrate:     54.0 MBit/s
        tx duration:    5397559 us
        rx bitrate:     54.0 MBit/s
        rx duration:    0 us
        airtime weight: 256
        authorized:     yes
        authenticated:  yes
        associated:     yes
        preamble:       long
        WMM/WME:        yes
        MFP:            no
        TDLS peer:      no
        DTIM period:    0
        beacon interval:100
        short slot time:yes
        connected time: 5038 seconds
        associated at [boottime]:       130.290s
        associated at:  1702504142176 ms
        current time:   1702509180537 ms
N6GKJ
N6GKJ's picture
I did a wifi scan and found a
I did a wifi scan and found a clear channel at 132, I have no more packe drops, still did not impcat my link speed
 
root@N6GKJ-Site3:~# iw wlan0 station dump
Station 18:fd:74:49:01:d9 (on wlan0)
        inactive time:  0 ms
        rx bytes:       572652
        rx packets:     8050
        tx bytes:       111185
        tx packets:     534
        tx retries:     0
        tx failed:      0
        rx drop misc:   0
        signal:         -57 [-57, -73] dBm
        signal avg:     -57 [-57, -73] dBm
        tx bitrate:     54.0 MBit/s
        tx duration:    228526 us
        rx bitrate:     54.0 MBit/s
        rx duration:    0 us
        airtime weight: 256
        authorized:     yes
        authenticated:  yes
        associated:     yes
        preamble:       long
        WMM/WME:        yes
        MFP:            no
        TDLS peer:      no
        DTIM period:    0
        beacon interval:100
        short slot time:yes
        connected time: 379 seconds
        associated at [boottime]:       147.725s
        associated at:  1702510016693 ms
        current time:   1702510395950 ms
N6GKJ
N6GKJ's picture
ok... hAPac lite low speed
I looked up the radio, it does not seem to be MIMO, 54Mbps is probably normal any thoughs?
nc8q
nc8q's picture
54Mbps is probably normal

IMHO, 54Mbps is abnormal.
An 802.11n MCS would be normal.

 

Image Attachments: 
K7EOK
I don't see why 54Mbps for
I don't see why 54Mbps for what is supposed to be an endpoint on the network (not usually used for connections) is a problem.  Most of the equipment installed these days that would be a reasonable number.  If you need faster, then I guess you would have to build a new mesh from entirely ac chipset equipment and have the LAN served into a gigabit speed switch rather than into a hAP ac lite.

Ed
 
K7EOK
Chuck ... you're much more
Chuck ... you're much more into the networking details than me.  So I defer to your judgement if 54 is "normal" or not.
73,  Ed
 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer