You are here

Map Works, sometimes

4 posts / 0 new
Last post
na0d
na0d's picture
Map Works, sometimes
Any ideas or steps as to why my supernode and subnodes drop off the map a lot. It's not Internet connection, and I've been running the latest firmware (non nightly build). I did try and switch the SN to a nightly build and nothing. It usually works...any ideas?

It is a HAP AC2 

Not a biggie because stuff is working locally it seems and I've got plenty of tunnels out so that shouldn't be an issue.

Thanks

-Chris, NA0D
nc8q
nc8q's picture
I did try and switch the SN to a nightly build and nothing.
Hi, Chris:

The AREDN developers appreciate you testing the experimental babel-only nightly build.

Our SN tunnel is not working well.

Please consider running the current release candidate (20250928 babel+olsr)
to see if our link improves.
Remember to 1st backup, because you may need to reload factory.bin when
moving from babel-only to babel+olsr.
;-)

73, Chuck
 
na0d
na0d's picture
Hi, Chuck!
Hi, Chuck!
I put it back to 3.25.8.0 for now and seem to lost all of my tunnels and the backup didnt work. Yay. I apparently was having issues with the nightly and did something wrong here. SOO I guess I'll try and get all the tunnels back and wait for the new release coming...oops. i may reinstall the whole node.
nc8q
nc8q's picture
Danger Will Robinson!
Hi, Chris:

Reverting from babel-only to babel+olsr via sysupgrade is not recommended.
If reverting from babel-only to babel+olsr, I suggest to
TFTP factory.bin, then upgrade to 20250928 sysupgrade.

A babel-only backup may not work well if restored to a babel+olsr.
Do you have a backup of a former babel-olsr?

73, Chuck
 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer