You are here

M2 Rocket Upgrade Problem

4 posts / 0 new
Last post
AB4YY
M2 Rocket Upgrade Problem

I have a remote M2 Rocket node that I was going to upgrade to the latest firmward but accidently got off with loading the wrong patch.

  • Current FW ver is: 3.16.1.0
  • Intent was to load v3.16.1.1 OTA Fixup Patch (patchFixAREDN31611SysUpgrad.tgz)
  • Mistakenly loaded V3.15.1.0 Sysupgrade Patch (patch-sysupgrade3.tgz)
  • The node rebooted okay but when I try tp go into Setup, I get this error:

Bad Gateway

The process did not produce any response

I am not able to go to the Setup screen and always get the one above.

Note that I am able to ssh into the node and should be able to add, remove or change files in the node.

Any help would be appreciated.
73 - Mike ab4yy

K5DLQ
K5DLQ's picture
if you have another 3.16.1.0
if you have another 3.16.1.0 node, you should be able to scp the following files from it, to your broken node:
/etc/config.mesh/uhttpd
/usr/local/bin/spawn_sysupgrade
/usr/local/bin/upgrade_kill_prep
/www/cgi-bin/admin
/www/cgi-bin/perlfunc.pm

(If the files don't exist on your 3.16.1.0 node, you can ignore them on the broken node)
AB4YY
Thanks!  I used 7-zip to

Thanks!  I used 7-zip to extract a 3.16.1.0 firmware into a directory in Windows 7 then used WinSCP to copy the desired files from there to the node OTA.  It was super easy. 
73 - Mike ab4yy

K5DLQ
K5DLQ's picture
good deal!
good deal!

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer