I am running version 3.21.4.0 firmware on Ubiquiti Bullet M2 HD. I am trying to set up a tunnel client.
I cannot download the tunnel client software as I don't have internet access. I am using a smart switch. Not sure if it is correct.
Tthe set up:
Vlan1 is to my router.
Vlan2 is computer1.
Vlan3 is computer2.
Vlan8 is the Bullet.
Both computers are connected to Vlan (router).
The Bullet (Vlan8) is connected to Computer2.(Vlan3)
Mesh RF IP: 10.94.25.133
NetMask: 255.0.0.0
LAN IP: 10.240.204.41
NetMask: 255.255.255.248
WAN: DHCP
DNS1 8.8.8.8
DNS2 8.8.4.4
All help will be very much appreciated.
You are here
Longer I try the more confused it get!
Wed, 08/18/2021 - 19:35
#1
Longer I try the more confused it get!
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer
The AREDN online docs (https://arednmesh.readthedocs.io/en/latest/arednGettingStarted/advanced_config.html#internet-connectivity-requirements) explain that VLAN-1 is used by your node to identify Internet packets destined for the node. Sounds like your existing VLAN switch is somewhat complicated, with VLANs 1 & 2 already allocated to other purposes. Might be easier to keep things simple and use a separate device like a GL.iNet AR150 as your Internet/tunneling node (see the doc note under "Managed Switch Settings" for other possibilities).