You are here

Home » Forums » General discussion

Anyone using KN6PLV's waterfall with 3.23.8.0?

6 posts / 0 new
Log in or register to post comments
Last post
Fri, 09/01/2023 - 16:37
#1
W1ZPB
Anyone using KN6PLV's waterfall with 3.23.8.0?
Greetings:
    I've tried to install the waterfall_0.3_all.ipk package downloaded from https://github.com/kn6plv/waterfall on both my Ubiquiti NanoStation M5 XW and Microtik hAP, both of which have been updated to 3.23.8.0.
    On both, after I select the file for Upload Package and wait for a little bit, I get the following error message: 
Collected errors:
 * pkg_init_from_file: Malformed package file
/tmp/web/upload/newpkg.ipk.
    What am I doing wrong?
    Thanks, Charles   W1ZPB
Top
Wed, 10/04/2023 - 23:25
K7EOK
I had waterfall working fine
I had waterfall working fine on a BaseBox5 on 3.22.12.0 and I just upgraded to 3.23.8.0

I have re-installed all packages, and redone all the Advertised Services.  The node says the package is loaded and correct.  The waterfall is advertised.

All I get when I click the link is
 

Bad Gateway

The process did not produce any response

Any idea what's going on?  This is a very useful package.

Ed
 
Top
Thu, 10/05/2023 - 17:10
(Reply to #2)
AB7PA
Try upgrading to the latest

Try upgrading to the latest waterfall package.  Also, the waterfall app does not work on devices having 802.11ac chipsets.

Top
Fri, 10/13/2023 - 12:56
(Reply to #3)
nc8q
nc8q's picture
waterfall app does NOW work on devices having 802.11ac chipsets.
https://github.com/kn6plv/waterfall/blob/main/waterfall_0.5.1_all.ipk Works on my MikroTik SXTsq 5 ac (RBSXTsqG-5acD). 73, Chuck nc8q
Top
Wed, 10/25/2023 - 06:45
(Reply to #4)
TA9J
TA9J's picture
Mikrotik 952, TP-LINK CPE210 and CPE220
 I have installed https://github.com/kn6plv/waterfall/blob/main/waterfall_0.5.4_all.ipk sucessfully on Mikrotik 952, TP-LINK CPE210 and CPE220 
Top
Fri, 10/13/2023 - 10:57
W1ZPB
Rookie error
My problem was that I did a save-as of the .ipk file at https://github.com/kn6plv/waterfall, rather than clicking on it and downloading the raw file.   Now everything is happy: 
Installing waterfall (0.5.1) to root...

Please reboot node to update waterfall 
page permissions!!
Configuring waterfall.
Thanks for creating this file!
Charles  W1ZPB
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer