You are here

3.19.3.0 ARHP Update

7 posts / 0 new
Last post
kc8rgo
3.19.3.0 ARHP Update
I downloaded the update for ARHP and tried to install it.  I did a file choice,  but the UPLOAD button was not active.

Tried to re-download, choose etc multiple times ut no joy.

Vance   KC8RGO
Support File Attachment: 
K6AH
K6AH's picture
You just need to turn off
You just need to turn off your tunnel link first and the Upload button will work.
kc8rgo
Thanks, senior moment.
Thanks, senior moment.
K5DLQ
K5DLQ's picture
(there is a new feature in 3
(there is a new feature in 3.19.3.0 to make this VERY APPARENT). ;-)
 
WB6YOK
Thanks!
Those senior moments must be contagious.

I KNEW that!!!

Chuck...
WB6YOK
wa2ise
wa2ise's picture
You can use the "Download
You can use the "Download Firmware" refresh button to get a list of the firmware appropriate for your node.  Then you pick the one you want, and hit "download". And "keep settings".  An active tunnel didn't seem to matter here.  This is what I did.  When you hit download the node immediately goes into flashing the new firmware,(you'll see a screen telling you not to cut power.  It takes several minutes. 
AE6XE
AE6XE's picture
This path bypasses a check if

This path bypasses a check if tunnels are active and if so, increases the chances the upgrade won't take, not enough RAM.  

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer