You are here

Home » Forums » Hardware » Nodes

Version 2 of CPE210 V2 incompatable with AREDN?

15 posts / 0 new
Log in or register to post comments
Last post
Sun, 06/04/2017 - 11:19
#1
W9EO
Version 2 of CPE210 V2 incompatable with AREDN?

So I just purchased the TP Link CPE210 off amazon and received hardware Version 2 of the device and  was unable to flash the stable version of the firmware. I got the message with both the current nightly firmware build and stable "hardware not support" error. Yes I shortened the file names on both attempts.

Top
Sun, 06/04/2017 - 13:13
K5DLQ
K5DLQ's picture
If you try it with an
If you try it with an unchanged filename on the 3.17.1.0RC1 build and it still fails, please open a ticket in Bloodhound for this.
 
Top
Mon, 06/05/2017 - 01:02
(Reply to #2)
W9EO
Just tried 3.17.10RC1 build

Just tried 3.17.10RC1 build with the same result screen shot for clarity.

Firmware Version: (is the most current off the TP link Website)


Hardware Version:


I will post this error to bloodhound, thanks!

Edit Done it is now ticket #238 on bloodhound.

Top
Mon, 06/05/2017 - 10:24
(Reply to #3)
WU2S
WU2S's picture
Same issue with CPE510
Same problem with recently purchased CPE510. Attempted loading 3.17.1.0RC1 and 3.16.1.1 without success. Then downgraded PharOS to earlier version 1.3.2 and repeated same attempts without success. Also tried using shortened filenames without success.
Top
Wed, 08/02/2017 - 12:45
gm7gde
CPE210 incompatable

Same issue here with this FW on the CPE210
 

1.3.3 Build 20160526 Rel. 4923

Error message is hardware not supported
Top
Fri, 09/01/2017 - 03:13
G7DNM
CPE210 Firmware Issues.

Hi,
I am wondering if any progress has been made with these devices as there are many stations up here in the northwest of England bought v1, v1.1 and v2 thinking they were supported. I appreciate it may be a low priority as most are using Ubiquity devices but in the UK at least these are a very low cost alternative if they work and it seems a crying shame that these are languishing in a box at the back of the shack.
Best Regards
Eddie de G&DNM

Top
Fri, 09/01/2017 - 11:57
(Reply to #6)
KG6JEI
Have you posted your
Have you posted your willingness to assist, or your desire to see the device moved forward in bloodhound to try and move the ticket forward?
Top
Wed, 09/06/2017 - 05:36
(Reply to #7)
G7DNM
Assistance.

As much as I would like to assist in moving this forward, unfortunately I lack the technical know to do so. I am not a programmer. Hence the request.
Regards
G7DNM

Top
Fri, 09/01/2017 - 09:48
K6AH
K6AH's picture
I understand the frustration.
I understand the frustration.  The current priority is to get release 3.17.1.0 out the door.  We'll sure keep it in mind when we review priorities again.

Andre, K6AH
Top
Wed, 09/06/2017 - 05:46
(Reply to #9)
G7DNM
Thanks.

Hi Andre,
And thanks for the response.
I appreciate that there are bigger fish to fry, so to speak.
Several people have brought up the subject in recent discussions so I asked the question on their behalf really.
Currently these are available for around $50 / £40 in the UK so would make a very economical alternative.
Will keep one eye on the forum for any developments.
Thanks again for the response.
Best Regards
Eddie de G7DNM

Top
Sat, 07/14/2018 - 16:36
AA3JC
TP-link CPE210 v2.0 Firmware Version 2.1.11 Build 20181117 (5553

Purchased the latest TP-link CPE210 v2.0 Firmware Version 2.1.11 Build 20181117 (5553), but is not compatible with any of the builds available. I am getting "Harware not Compatible" error when trying the to install firmware.  This happens with the following firmware:

AREDN-3.16.1.1-cpe210-220-510-520-squashfs-factory.bin
AREDN-3.17.1.0RC1-cpe210-220-510-520-squashfs-factory.bin

I have read in these Forums that the problem is on-going due to the amount of and frequency of hardware changes TP-Link is making ongoing.  
Any idea when there may be a firmware for this version? Or am I doing something wrong?!


 

Image Attachments: 
Top
Sat, 07/14/2018 - 21:35
K5DLQ
K5DLQ's picture
you need the nightly builds.
you need the nightly builds.
Top
Tue, 07/17/2018 - 20:48
AA3JC
Link to Nighty Builds broken
Link to the Nighty builds from software is broken.  Any suggestions?
Top
Tue, 07/17/2018 - 20:57
(Reply to #13)
WU2S
WU2S's picture
Just checked

I just checked the link to the Nightly Builds and it is working properly.
After you get to the page, go to the targets directory then go to the ar71xx directory to get the file you need.

Top
Tue, 07/17/2018 - 21:49
AA3JC
Thanks! Working!
Me Bad!  was getting "404 Bad Server / or Path" error.  Had to clear my browser cache to fix, but all is good now!.... Also the link to the Nightly Build was the correct one.....Downloaded the one for version v2 and just got done upgrading the TP-Link firmware.  Working fine now!  Again Thank You!

73's
Joe
AA3JC
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer