For some reason my Rocket M2 will not change to correct time.I have selected time zone saved it rebooted it and same time and date shows up.Any suggestions?
I do not see evidence of a gateway in the screenshots you posted. If the node is not seeing a route to the web or otherwise has access to t time server on the mesh, you will not get a real-time posting.
for the node to have Internet access it must be attached via RF or dtd to another node or mesh that has a WAN gateway on it. I am assuming this is your first node so is attached to your computer and the computer has internet access via a home connection. Would this be accurate?
So, your AirRouter (that has internet), will need to have the "Mesh Gateway" field (on the Setup screen) enabled. After you set the time and (optionally) upload your location information to AREDN servers, you can disable the "Mesh Gateway" as it is NOT a best practice to leave it enabled.
do you have an internet connection with your mesh so the node can access the time server?
Keith - AI6BX
yes
Time
I do not see evidence of a gateway in the screenshots you posted. If the node is not seeing a route to the web or otherwise has access to t time server on the mesh, you will not get a real-time posting.
OK where would that setting be?Sorry but it's a learning curve for me.
Thank's
Tim
for the node to have Internet access it must be attached via RF or dtd to another node or mesh that has a WAN gateway on it. I am assuming this is your first node so is attached to your computer and the computer has internet access via a home connection. Would this be accurate?
Yes it is connected to port four of the Air Router which is connected to Internet.
Thank's
So, your AirRouter (that has internet), will need to have the "Mesh Gateway" field (on the Setup screen) enabled. After you set the time and (optionally) upload your location information to AREDN servers, you can disable the "Mesh Gateway" as it is NOT a best practice to leave it enabled.
That did work Thank You,but when i send it to update aredn it still shows the AirRouter instead of the Rocket?
Thank You
Tim
Actually, I see your two nodes. They are "stacked" at the same lat/lon so I had to click to "expand them"...