I cannot add a screen shot.Sooo.
I can not get to my hAp AC3 after an update. The mac address is shown but not the node name.
From my connected node with the update shows the neighborhood mac address.
Clicking on that mac address gets a page not showing the ip address.
Apparently one can not edit or insert the ip address for this sub-page pullup.
I have reset my main router. Pulled the power plug on the hAp AC3 for a hard reset.
ipconfig shows 10.30.165.97 for lan, but 192.168.254.254 for a gateway.
My only alternative is to go back to initial install but before I do; has anyone had this happen to their system as well?
Greg
I can not get to my hAp AC3 after an update. The mac address is shown but not the node name.
From my connected node with the update shows the neighborhood mac address.
Clicking on that mac address gets a page not showing the ip address.
Apparently one can not edit or insert the ip address for this sub-page pullup.
I have reset my main router. Pulled the power plug on the hAp AC3 for a hard reset.
ipconfig shows 10.30.165.97 for lan, but 192.168.254.254 for a gateway.
My only alternative is to go back to initial install but before I do; has anyone had this happen to their system as well?
Greg
You did save a backup, yes?
73, Chuck
I may have but since I can not reach the AC3 hAp I have no way to load or boot it . Looks like a re-flash unless the nightly has a bug in mac address association with node names?
I used a few other nodes to test this theory out and have noticed a long delay in recapturing node names to show up in the Neighbor listing.
What I was doing was to first update my DtD nodes before updating my hAp. But when I first updated my hAp before updating my nodes is when the Hap got "ghosted" and grayed out on the DtD node side of neighbor list and then unreahable as clicvking on the gray mac address puts up the mini page showing no ipadress. ipconfig syays otherwise but then my browser does not accept the 10.30.xxx.xxx connect. It doesnt matter what cpu I use so something is amiss that I dont understand.
Greg