You are here

20250421-c4037600 - hAP ac lite - Upgraded not responding (2nd attempt) - all interfaces not active

3 posts / 0 new
Last post
w7sda
20250421-c4037600 - hAP ac lite - Upgraded not responding (2nd attempt) - all interfaces not active
Team, Thanks for your continued work!

FYI, same issue w this same build on the hAP ac lite where the upgrade failed and not responding. see notes below.
  • Upgrade from 3.25.2.0 to 20250421-c4037600
  • No interfaces enabled (no eth LEDs lite, only pwr & usr lite)
  • Upgrade via web interface
  • Node connected via DtD, no tunnels, radio disabled
  • No resolution when attempting reset via 5sec/15sec or reboot
73/Jay
nc8q
nc8q's picture
20250421-c4037600 - hAP ac lite
mikrotik_routerboard-952ui-5ac2nd-initramfs-kernel.bin

Hi, Jay:

Perhaps if you did a new install and loaded the 20250421 initramfs-kernel.bin, then
the sysupgrade?

73, Chuck
w7sda
@nc8q Will do... but assuming
@nc8q Will do... but assuming most users will be upgrading from the current stable? unless we provide this caveat. 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer