Did a quick search but couldn't find anything.
hAP AC3 used as an AP only (no direct mesh RF connection), I would like to change the radio used for AP access (LAN) to AC.
Currently the LAN AP radio only seems to be using the N radio.
hAP AC3 used as an AP only (no direct mesh RF connection), I would like to change the radio used for AP access (LAN) to AC.
Currently the LAN AP radio only seems to be using the N radio.
How do you determine this?
I think AREDN firmware operating as an Access Point only does 20 MHz bandwidth.
If true;
I think there is only 1 exclusive 802.11ac Modulation Coding Scheme, VHT MCS8, 256 QAM, TxMbps 156.0 LGI or 173.3 SGI.
How do you determine that your AP/Client (is, is not) attempting VHT MCS8 ?
My 802.11ac AREDN devices seem to be only using ODFM modulation.
My maximum TxMbps is 54 TxMbps. :-(
73, Chuck
If the LAN AP radio is set to AC, there is definitely something wrong with how the router manages traffic.
The Modulation Coding Scheme (MCS0 to MCS7) for 802.11n (HT) is
identical to the MCS for 802.11ac (VHT).
802.11ac (VHT) has 1 additional MCS (MCS8) using QAM264.
My hAP-ac3 has two 5 GHz Wi-Fi connections:
A hAP-ac-lite and my mobile phone.
Currently both of those clients have the same MCS connections:
tx bitrate: 72.2 MBit/s MCS 7 short GI
rx bitrate: 72.2 MBit/s MCS 7 short GI
( I assume 1 spacial stream is used or the same content in 2 streams
because there is no match to 72.2 MBits/s at any other MCS except at 1 stream.)
I tested with a ssh connection to the ac3 from my desktop workstation
(ssh -p2222 root@nc8q-hap-ac3)
then issuing the command:
iw wlan1 station dump
Until you see a bitrate of 156.0 or 173.3 is no difference between
802.11n and 802.11ac modulation coding (at 20 MHz band width).
So, what connection speed is your hAP-ac3 reporting?
73, Chuck
Thanks for replying Chuck.
I must be doing something incorrect.. When i issue the command iw wlan1 station dump as you asked, there is no data being returned (see screenshot).
I need the AP on 2Ghz for now, I have a rPI in the attic for ADSB and it's connected to the hAP.
issuing iw wlan0 station dump:
root@VE7KOD-hAP-ac3:~# iw wlan0 station dump
Station b8:27:eb:79:31:f9 (on wlan0)
inactive time: 0 ms
rx bytes: 173145025
rx packets: 623915
tx bytes: 78065618
tx packets: 513553
tx retries: 257
tx failed: 427
rx drop misc: 515
signal: -58 [-60, -61, -96, -96] dBm
signal avg: -58 [-60, -61, -96, -96] dBm
tx bitrate: 65.0 MBit/s MCS 6 short GI
tx duration: 23334219 us
rx bitrate: 72.2 MBit/s MCS 7 short GI
rx duration: 0 us
airtime weight: 256
authorized: yes
authenticated: yes
associated: yes
preamble: short
WMM/WME: yes
MFP: no
TDLS peer: no
DTIM period: 2
beacon interval:100
short preamble: yes
short slot time:yes
connected time: 43844 seconds
associated at [boottime]: 36.996s
associated at: 1701926506396 ms
current time: 1701970349420 ms
root@VE7KOD-hAP-ac3:~#
------------------------------------------------------------------------------------------------
A few more notes, this is the same thing that is happening on two AC3's both of which started their lives with RouterOS 7.x. I took the PCB out of one of them to take some photos of the board incase anyone needs to see them to compare if something changed.
73 - Appreciate your assistance.
Jesse
VE7KOD
iw wlan0 station dump. You entered:
iw wlan1 station dump
Sorry I must have misunderstood you, I assumed by you entering the command into your ac3... I would have to enter the same command.. (see screenshot of your reply below).
My bad, Sorry ( my Canadian coming out)..
Anyways.. I'm not sure what the way ahead is. Obviously there has been a change in something, maybe hardware or bootloader? for the ac3's with routerosV7x to behave like this compared to the routerosV6x...
I'm not the only person reporting this issue either.. others in this forum are and github AND openwrt...
Regret selling my acLite now HAHA..
Anyways, I appreciate your assistance Chuck
hi hi
Jesse
Hi, Jesse:
I got confused about which band you were using in your path to your internet speed tests.
I think wlan0 is the 2.4 GHz radio and
wlan1 is the 5 GHz radio.
I am ignorant about RouterOS and mostly ignorant about OpenWRT.
Typically when I receive an AREDN compatible device
its 1st power up is into TFTP mode then an AREDN firmware load.
:-|
73, Chuck
Hope you have a wonderful Christmas season!
Jesse
root@VE7KOD-hAP-ac3:~# wifi status
{
"radio0": {
"up": true,
"pending": false,
"autostart": true,
"disabled": false,
"retry_setup_failed": false,
"config": {
"channel": "11",
"hwmode": "11g",
"htmode": "HT20",
"path": "platform/soc/a000000.wifi",
"disabled": false
},
"interfaces": [
{
"section": "@wifi-iface[0]",
"ifname": "wlan0",
"config": {
"ifname": "wlan0",
"mode": "ap",
"ssid": "VE7KOD-AREDN",
"encryption": "psk2",
"key": "PASSWORD",
"network": [
"lan"
],
"mode": "ap"
},
"vlans": [
],
"stations": [
]
}
]
},
"radio1": {
"up": false,
"pending": false,
"autostart": true,
"disabled": true,
"retry_setup_failed": false,
"config": {
"hwmode": "11a",
"htmode": "HT20",
"path": "platform/soc/a800000.wifi",
"disabled": true
},
"interfaces": [
{
"section": "@wifi-iface[1]",
"config": {
"ifname": "wlan1"
},
"vlans": [
],
"stations": [
]
}
]
}
}
Here is the output of dmesg on the AREDN ac3:
*****************************************************
root@VE7KOD-hAP-ac3:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.176 (aredn@0dbf71a25056) (arm-openwrt-linux-mu slgnueabi-gcc (OpenWrt GCC 11.2.0 r20134-5f15225c1e) 11.2.0, GNU ld (GNU Binutil s) 2.37) #0 SMP Thu Apr 27 20:28:15 2023
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
[ 0.000000] OF: fdt: Machine model: MikroTik hAP ac3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x000000008fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087dfffff]
[ 0.000000] node 0: [mem 0x0000000087e00000-0x0000000087ffffff]
[ 0.000000] node 0: [mem 0x0000000088000000-0x000000008fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fffffff]
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 15 pages/cpu s30412 r8192 d22836 u61440
[ 0.000000] pcpu-alloc: s30412 r8192 d22836 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line:
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, l inear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, lin ear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 249544K/262144K available (4564K kernel code, 569K rwdata , 704K rodata, 1024K init, 224K bss, 12600K reserved, 0K cma-reserved, 0K highme m)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[ 0.000010] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 43980 46511096ns
[ 0.000026] Switching to timer-based delay loop, resolution 20ns
[ 0.000353] Calibrating delay loop (skipped), value calculated using timer fr equency.. 96.00 BogoMIPS (lpj=480000)
[ 0.000379] pid_max: default: 32768 minimum: 301
[ 0.000549] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea r)
[ 0.000569] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001360] CPU: Testing write buffer coherency: ok
[ 0.001711] qcom_scm: convention: smc legacy
[ 0.002644] Setting up static identity map for 0x80300000 - 0x8030003c
[ 0.002807] rcu: Hierarchical SRCU implementation.
[ 0.003062] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.003417] smp: Bringing up secondary CPUs ...
[ 0.006855] smp: Brought up 1 node, 4 CPUs
[ 0.006882] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.006892] CPU: All CPU(s) started in SVC mode.
[ 0.012105] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.012282] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.012313] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.012568] pinctrl core: initialized pinctrl subsystem
[ 0.014380] NET: Registered protocol family 16
[ 0.014803] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.016085] thermal_sys: Registered thermal governor 'step_wise'
[ 0.016545] cpuidle: using governor ladder
[ 0.016609] cpuidle: using governor menu
[ 0.036208] gpio-456 (enable USB power): hogged as output/high
[ 0.045285] cryptd: max_cpu_qlen set to 1000
[ 0.049411] usbcore: registered new interface driver usbfs
[ 0.049488] usbcore: registered new interface driver hub
[ 0.049562] usbcore: registered new device driver usb
[ 0.049628] pps_core: LinuxPPS API ver. 1 registered
[ 0.049640] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
[ 0.049671] PTP clock support registered
[ 0.051836] clocksource: Switched to clocksource arch_sys_counter
[ 0.052852] NET: Registered protocol family 2
[ 0.053115] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear )
[ 0.053883] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.053935] TCP established hash table entries: 2048 (order: 1, 8192 bytes, l inear)
[ 0.053975] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.054025] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.054162] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.054206] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.054430] NET: Registered protocol family 1
[ 0.054481] PCI: CLS 0 bytes, default 64
[ 0.056637] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 0.060859] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.060882] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.197737] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[ 0.197764] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[ 0.199375] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[ 0.199488] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[ 0.199592] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[ 0.199693] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[ 0.200038] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.200697] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.200751] msm_serial 78af000.serial: uartclk = 1843200
[ 0.200812] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 33, base_baud = 115200) is a MSM
[ 0.200844] msm_serial: console setup on port #0
[ 0.740113] printk: console [ttyMSM0] enabled
[ 0.745349] msm_serial: driver initialized
[ 0.754384] loop: module loaded
[ 0.756167] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1
[ 0.756344] nand: Winbond W29N01HV
[ 0.762983] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64
[ 0.766212] 2 fixed-partitions partitions found on MTD device qcom_nand.0
[ 0.773736] Creating 2 MTD partitions on "qcom_nand.0":
[ 0.780560] 0x000000000000-0x000000a00000 : "kernel"
[ 0.802191] 0x000000a00000-0x000008000000 : "ubi"
[ 0.992510] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 0.994121] spi-nor spi0.0: w25q128jv (16384 Kbytes)
[ 0.998670] 2 fixed-partitions partitions found on MTD device spi0.0
[ 1.003679] OF: Bad cell count for /soc/spi@78b5000/flash@0/partitions
[ 1.009949] OF: Bad cell count for /soc/spi@78b5000/flash@0/partitions
[ 1.016598] Creating 2 MTD partitions on "spi0.0":
[ 1.022796] 0x000000000000-0x000000080000 : "Qualcomm"
[ 1.028102] 0x000000080000-0x000000100000 : "RouterBoot"
[ 1.038725] 3 routerbootpart partitions found on MTD device RouterBoot
[ 1.038770] Creating 3 MTD partitions on "RouterBoot":
[ 1.044515] 0x00000000e000-0x000000010000 : "hard_config"
[ 1.050113] 0x000000010000-0x000000017ea4 : "dtb_config"
[ 1.055561] 0x00000003d000-0x00000003e000 : "soft_config"
[ 1.076920] ipqess-edma c080000.ethernet: generated random MAC address c2:40: 33:a7:01:48
[ 1.101598] i2c /dev entries driver
[ 1.103813] sdhci: Secure Digital Host Controller Interface driver
[ 1.103906] sdhci: Copyright(c) Pierre Ossman
[ 1.110153] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.120518] MikroTik RouterBOARD hardware configuration sysfs driver v0.08
[ 1.121719] MikroTik RouterBOARD software configuration sysfs driver v0.05
[ 1.127645] NET: Registered protocol family 17
[ 1.134244] 8021q: 802.1Q VLAN Support v1.8
[ 1.138319] Registering SWP/SWPB emulation handler
[ 1.155053] qca8k-ipq4019 c000000.switch: configuring for fixed/internal link mode
[ 1.155305] qca8k-ipq4019 c000000.switch: Link is Up - 1Gbps/Full - flow cont rol rx/tx
[ 1.237728] qca8k-ipq4019 c000000.switch lan4 (uninitialized): PHY [90000.mdi o-1:00] driver [Qualcomm QCA8075] (irq=POLL)
[ 1.327520] qca8k-ipq4019 c000000.switch lan3 (uninitialized): PHY [90000.mdi o-1:01] driver [Qualcomm QCA8075] (irq=POLL)
[ 1.418063] qca8k-ipq4019 c000000.switch lan2 (uninitialized): PHY [90000.mdi o-1:02] driver [Qualcomm QCA8075] (irq=POLL)
[ 1.508206] qca8k-ipq4019 c000000.switch lan1 (uninitialized): PHY [90000.mdi o-1:03] driver [Qualcomm QCA8075] (irq=POLL)
[ 1.600080] qca8k-ipq4019 c000000.switch wan (uninitialized): PHY [90000.mdio -1:04] driver [Qualcomm QCA8075] (irq=POLL)
[ 1.610558] DSA: tree 0 setup
[ 1.613813] UBI: auto-attach mtd1
[ 1.613850] ubi0: attaching mtd1
[ 3.275806] ubi0: scanning is finished
[ 3.301504] ubi0: attached mtd1 (name "ubi", size 118 MiB)
[ 3.301598] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.306101] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.312878] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.319659] ubi0: good PEBs: 944, bad PEBs: 0, corrupted PEBs: 0
[ 3.326491] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 12 8
[ 3.332744] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequ ence number: 1916661502
[ 3.339722] ubi0: available PEBs: 0, total reserved PEBs: 944, PEBs reserved for bad PEB handling: 20
[ 3.349135] ubi0: background thread "ubi_bgt0d" started, PID 123
[ 3.350638] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.364215] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.377318] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.379016] Freeing unused kernel memory: 1024K
[ 3.425149] Run /sbin/init as init process
[ 3.425391] with arguments:
[ 3.425475] /sbin/init
[ 3.425547] with environment:
[ 3.425621] HOME=/
[ 3.425696] TERM=linux
[ 4.522352] init: Console is alive
[ 4.522679] init: - watchdog -
[ 5.523156] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.550203] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 101
[ 5.679271] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
[ 5.690089] init: - preinit -
[ 7.028215] random: procd: uninitialized urandom read (4 bytes read)
[ 9.513812] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 9.514082] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 184
[ 9.600257] UBIFS (ubi0:1): recovery needed
[ 9.632080] random: crng init done
[ 9.839537] UBIFS (ubi0:1): recovery completed
[ 9.839946] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root fs_data"
[ 9.843049] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u nit sizes: 2048 bytes/2048 bytes
[ 9.850858] UBIFS (ubi0:1): FS size: 111484928 bytes (106 MiB, 878 LEBs), jou rnal size 5586944 bytes (5 MiB, 44 LEBs)
[ 9.860848] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 9.871399] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID D9ADF 105-109C-4F9E-8B5E-78784CFB8815, small LPT model
[ 9.888362] mount_root: switching to ubifs overlay
[ 9.916716] urandom-seed: Seeding with /etc/urandom.seed
[ 10.320379] procd: - early -
[ 10.320594] procd: - watchdog -
[ 10.937938] procd: - watchdog -
[ 10.950768] procd: - ubus -
[ 11.161668] procd: - init -
[ 12.301467] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.329459] tun: Universal TUN/TAP device driver, 1.6
[ 12.333191] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 12.338734] Loading modules backported from Linux version v5.15.92-0-ge515b99 02f5f
[ 12.338889] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
[ 12.376072] urngd: v1.0.2 started.
[ 13.831402] ------------[ cut here ]------------
[ 13.831466] WARNING: CPU: 1 PID: 7 at target-arm_cortex-a7+neon-vfpv4_musl_ea bi/linux-ipq40xx_mikrotik/ath10k-ct-regular/ath10k-ct-2022-05-13-f808496f/ath10k -5.15/core.c:736 0xbf204410 [ath10k_core@e95ea120+0x65000]
[ 13.835165] Modules linked in: ath10k_pci(+) ath10k_core ath nft_reject_ipv4 nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nf t_limit nft_hash nft_flow_offload nft_fib_ipv4 nft_fib nft_ct nft_counter nft_ch ain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 cfg80211 nfnetlink nf_reject_ipv4 nf_log_ipv4 nf_log_common nf_defrag_ipv4 libcrc32c hwmon compat l edtrig_gpio ipip tunnel4 ip_tunnel tun ghash_arm_ce cmac leds_gpio dwc3 dwc3_qco m gpio_button_hotplug crc32c_generic
[ 13.876905] CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.10.176 #0
[ 13.899077] Hardware name: Generic DT based system
[ 13.905513] Workqueue: ath10k_wq 0xbf204d54 [ath10k_core@e95ea120+0x65000]
[ 13.910115] Function entered at [<c030b440>] from [<c0308594>]
[ 13.916963] Function entered at [<c0308594>] from [<c052a7d4>]
[ 13.922778] Function entered at [<c052a7d4>] from [<c031b5a0>]
[ 13.928593] Function entered at [<c031b5a0>] from [<c031b63c>]
[ 13.934410] Function entered at [<c031b63c>] from [<bf204410>]
[ 13.940243] Function entered at [<bf204410>] from [<bf1fdc48>]
[ 13.946043] Function entered at [<bf1fdc48>] from [<bf204f4c>]
[ 13.951856] Function entered at [<bf204f4c>] from [<c032eb00>]
[ 13.957673] Function entered at [<c032eb00>] from [<c032edf8>]
[ 13.963488] Function entered at [<c032edf8>] from [<c03338ac>]
[ 13.969306] Function entered at [<c03338ac>] from [<c0300128>]
[ 13.975121] Exception stack(0xc1053fb0 to 0xc1053ff8)
[ 13.980939] 3fa0: 00000000 00000000 00000 000 00000000
[ 13.986068] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000 000 00000000
[ 13.994225] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 14.002426] ---[ end trace ed068dab6e7dd540 ]---
[ 14.008827] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 14.013694] ath10k_ahb a000000.wifi: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 14.027566] ath10k_ahb a000000.wifi: firmware ver 10.4-ddwrt-4019-tW-13-7264 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,bit23,txstat us-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,c h-regs-CT,nop-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,be acon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 58419db9
[ 14.082566] ath10k_ahb a000000.wifi: Loading BDF type 0
[ 14.292104] ath10k_ahb a000000.wifi: board_file api 1 bmi_id 0:16 crc32 338a2 5b7
[ 15.473715] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid : 96
[ 15.473772] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 15.510282] ath10k_ahb a000000.wifi: wmi print 'ChipType 1100 ChipTypeID 30 B oardID 10 P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0 half/quarter'
[ 15.511249] ath10k_ahb a000000.wifi: wmi print 'free: 83700 iram: 28672 sram: 43024'
[ 15.555788] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-ca l-file max-sta 32 raw 0 hwcrypto 1
[ 15.621449] ath: EEPROM regdomain: 0x0
[ 15.621469] ath: EEPROM indicates default country code should be used
[ 15.621475] ath: doing EEPROM country->regdmn map search
[ 15.621487] ath: country maps to regdmn code: 0x60
[ 15.621496] ath: Country alpha2 being used: HX
[ 15.621502] ath: Regpair used: 0x60
[ 17.097832] ------------[ cut here ]------------
[ 17.097912] WARNING: CPU: 0 PID: 7 at target-arm_cortex-a7+neon-vfpv4_musl_ea bi/linux-ipq40xx_mikrotik/ath10k-ct-regular/ath10k-ct-2022-05-13-f808496f/ath10k -5.15/core.c:736 0xbf204410 [ath10k_core@e95ea120+0x65000]
[ 17.101571] Modules linked in: ath10k_pci(+) ath10k_core ath nft_reject_ipv4 nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nf t_limit nft_hash nft_flow_offload nft_fib_ipv4 nft_fib nft_ct nft_counter nft_ch ain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 cfg80211 nfnetlink nf_reject_ipv4 nf_log_ipv4 nf_log_common nf_defrag_ipv4 libcrc32c hwmon compat l edtrig_gpio ipip tunnel4 ip_tunnel tun ghash_arm_ce cmac leds_gpio dwc3 dwc3_qco m gpio_button_hotplug crc32c_generic
[ 17.143404] CPU: 0 PID: 7 Comm: kworker/u8:0 Tainted: G W 5.10 .176 #0
[ 17.165533] Hardware name: Generic DT based system
[ 17.173343] Workqueue: ath10k_wq 0xbf204d54 [ath10k_core@e95ea120+0x65000]
[ 17.177937] Function entered at [<c030b440>] from [<c0308594>]
[ 17.184783] Function entered at [<c0308594>] from [<c052a7d4>]
[ 17.190602] Function entered at [<c052a7d4>] from [<c031b5a0>]
[ 17.196417] Function entered at [<c031b5a0>] from [<c031b63c>]
[ 17.202234] Function entered at [<c031b63c>] from [<bf204410>]
[ 17.208052] Function entered at [<bf204410>] from [<bf1fdc48>]
[ 17.213865] Function entered at [<bf1fdc48>] from [<bf204f4c>]
[ 17.219681] Function entered at [<bf204f4c>] from [<c032eb00>]
[ 17.225497] Function entered at [<c032eb00>] from [<c032edf8>]
[ 17.231310] Function entered at [<c032edf8>] from [<c03338ac>]
[ 17.237130] Function entered at [<c03338ac>] from [<c0300128>]
[ 17.242946] Exception stack(0xc1053fb0 to 0xc1053ff8)
[ 17.248762] 3fa0: 00000000 00000000 00000 000 00000000
[ 17.253889] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000 000 00000000
[ 17.262046] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 17.270241] ---[ end trace ed068dab6e7dd541 ]---
[ 17.276682] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 17.281496] ath10k_ahb a800000.wifi: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 17.295427] ath10k_ahb a800000.wifi: firmware ver 10.4-ddwrt-4019-tW-13-7264 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,bit23,txstat us-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,c h-regs-CT,nop-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,be acon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 58419db9
[ 17.350366] ath10k_ahb a800000.wifi: Loading BDF type 0
[ 17.547163] ath10k_ahb a800000.wifi: board_file api 1 bmi_id 0:17 crc32 69e65 f6d
[ 18.728691] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid : 96
[ 18.728749] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 18.764495] ath10k_ahb a800000.wifi: wmi print 'ChipType 1100 ChipTypeID 30 B oardID 11 P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0 half/quarter'
[ 18.765483] ath10k_ahb a800000.wifi: wmi print 'free: 83700 iram: 28672 sram: 43024'
[ 18.805453] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-ca l-file max-sta 32 raw 0 hwcrypto 1
[ 18.871325] ath: EEPROM regdomain: 0x0
[ 18.871339] ath: EEPROM indicates default country code should be used
[ 18.871345] ath: doing EEPROM country->regdmn map search
[ 18.871358] ath: country maps to regdmn code: 0x60
[ 18.871366] ath: Country alpha2 being used: HX
[ 18.871372] ath: Regpair used: 0x60
[ 18.881721] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 28.508945] ipqess-edma c080000.ethernet eth0: configuring for fixed/internal link mode
[ 28.510241] ipqess-edma c080000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 28.512629] qca8k-ipq4019 c000000.switch lan1: configuring for phy/psgmii lin k mode
[ 29.583960] 8021q: adding VLAN 0 to HW filter on device lan1
[ 29.587950] br0: port 1(lan1) entered blocking state
[ 29.588826] br0: port 1(lan1) entered disabled state
[ 29.595910] device lan1 entered promiscuous mode
[ 29.598693] device eth0 entered promiscuous mode
[ 29.612890] br-dtdlink: port 1(br0.2) entered blocking state
[ 29.612967] br-dtdlink: port 1(br0.2) entered disabled state
[ 29.618020] device br0.2 entered promiscuous mode
[ 29.623381] device br0 entered promiscuous mode
[ 29.647376] br-lan: port 1(br0.3) entered blocking state
[ 29.647461] br-lan: port 1(br0.3) entered disabled state
[ 29.652866] device br0.3 entered promiscuous mode
[ 29.671417] br-wan: port 1(br0.4) entered blocking state
[ 29.671489] br-wan: port 1(br0.4) entered disabled state
[ 29.676707] device br0.4 entered promiscuous mode
[ 29.693239] qca8k-ipq4019 c000000.switch lan2: configuring for phy/psgmii lin k mode
[ 29.693902] 8021q: adding VLAN 0 to HW filter on device lan2
[ 29.702312] br0: port 2(lan2) entered blocking state
[ 29.705675] br0: port 2(lan2) entered disabled state
[ 29.711361] device lan2 entered promiscuous mode
[ 29.727578] qca8k-ipq4019 c000000.switch wan: configuring for phy/psgmii link mode
[ 29.728283] 8021q: adding VLAN 0 to HW filter on device wan
[ 29.737358] br0: port 3(wan) entered blocking state
[ 29.739591] br0: port 3(wan) entered disabled state
[ 29.745485] device wan entered promiscuous mode
[ 29.757052] qca8k-ipq4019 c000000.switch lan3: configuring for phy/psgmii lin k mode
[ 29.757659] 8021q: adding VLAN 0 to HW filter on device lan3
[ 29.766303] br0: port 4(lan3) entered blocking state
[ 29.769475] br0: port 4(lan3) entered disabled state
[ 29.775152] device lan3 entered promiscuous mode
[ 29.786121] qca8k-ipq4019 c000000.switch lan4: configuring for phy/psgmii lin k mode
[ 29.786782] 8021q: adding VLAN 0 to HW filter on device lan4
[ 29.795750] br0: port 5(lan4) entered blocking state
[ 29.798540] br0: port 5(lan4) entered disabled state
[ 29.803972] device lan4 entered promiscuous mode
[ 31.833752] qca8k-ipq4019 c000000.switch wan: Link is Up - 1Gbps/Full - flow control rx/tx
[ 32.043427] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid : 96
[ 32.043492] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 32.079821] ath10k_ahb a000000.wifi: wmi print 'ChipType 1100 ChipTypeID 30 B oardID 10 P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0 half/quarter'
[ 32.080739] ath10k_ahb a000000.wifi: wmi print 'free: 83700 iram: 28672 sram: 43024'
[ 32.203861] ath10k_ahb a000000.wifi: rts threshold -1
[ 32.205524] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 32.211003] br0: port 3(wan) entered blocking state
[ 32.219051] br0: port 3(wan) entered forwarding state
[ 32.225199] br-dtdlink: port 1(br0.2) entered blocking state
[ 32.229012] br-dtdlink: port 1(br0.2) entered forwarding state
[ 32.235329] br-lan: port 1(br0.3) entered blocking state
[ 32.240367] br-lan: port 1(br0.3) entered forwarding state
[ 32.246263] br-wan: port 1(br0.4) entered blocking state
[ 32.251112] br-wan: port 1(br0.4) entered forwarding state
[ 32.257118] br-lan: port 2(wlan0) entered blocking state
[ 32.262052] br-lan: port 2(wlan0) entered disabled state
[ 32.267678] device wlan0 entered promiscuous mode
[ 32.684369] br-lan: port 2(wlan0) entered blocking state
[ 32.684423] br-lan: port 2(wlan0) entered forwarding state
[ 32.713074] qca8k-ipq4019 c000000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 32.713179] br0: port 1(lan1) entered blocking state
[ 32.720267] br0: port 1(lan1) entered forwarding state
[ 32.793096] qca8k-ipq4019 c000000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 32.793198] br0: port 2(lan2) entered blocking state
[ 32.800307] br0: port 2(lan2) entered forwarding state
[ 32.883372] qca8k-ipq4019 c000000.switch lan3: Link is Up - 1Gbps/Full - flow control rx/tx
[ 32.883468] br0: port 4(lan3) entered blocking state
[ 32.890551] br0: port 4(lan3) entered forwarding state
[ 33.041495] ath10k_ahb a000000.wifi: NOTE: Firmware DBGLOG output disabled i n debug_mask: 0x10000000
[ 49.593922] qca8k-ipq4019 c000000.switch lan4: Link is Up - 100Mbps/Full - fl ow control rx/tx
[ 49.594636] br0: port 5(lan4) entered blocking state
[ 49.601794] br0: port 5(lan4) entered forwarding state
[ 6784.349236] ath10k_ahb a000000.wifi: htt tx: fixing invalid VHT TX rate code 0xff
[ 7570.058950] uploadctlservic (14606): drop_caches: 3
[ 7989.564948] uploadctlservic (17163): drop_caches: 3
[10175.052124] ath10k_ahb a000000.wifi: mac flush vdev 0 drop 0 queues 0x1 ar->p aused: 0x0 arvif->paused: 0x0
[59909.594634] ath10k_ahb a000000.wifi: mac flush vdev 0 drop 0 queues 0x1 ar->p aused: 0x0 arvif->paused: 0x0
root@VE7KOD-hAP-ac3:~#
I had no radio (at all) when I initially flashed these hAP's from the previous stable build of AREDN 3.23.8 - no AP and no option to enable/disable the mesh network either. When I installed the previous nightly (and now latest stable) I do have radio functionality but there is something else going on with the poor performance.
Let me know if I can be any more help.. I'm at a loss of what's going on other than there is something in the firmware that is beyond my scope.. I can give you access to the hAP via AREDN tunnel (not connected to local mesh) not sure if that can help or not..
Thanks for your help
Jesse
VE7KOD
The DtD lan port only connects at 100Mbps FDX, not 1G