You are here

New to meshchat

5 posts / 0 new
Last post
ve2fda
ve2fda's picture
New to meshchat
Mshchat is install on a raspberry
trying to send message an get message error: could get lock ?
Trying to save a file and get message : not enough space?
Something wrong with my installation?
thanks for your help
Francois VE2FDA
ve2fda
ve2fda's picture
Working now
Thanks it is working now.
VE2FDA
Wd4nkz
Lock error message?
 
New to meshchat 

Mshchat is install on a raspberry
trying to send message an get message error: could get lock ?
Trying to save a file and get message : not enough space?
Something wrong with my installation?
i saw Francois VE2FDA message but I couldn't see his answer to him message so I'm reposting it.
​thanks for your help!  Ken Gifford WD4NKZ

Wd4nkz
getting lock error message
Well I see your answer but what does that mean?
Right now I'm just working on sending a message out and get the lock error message.
Ken
 
WT0F
Usually the lock error
Usually the lock error messages are a result of permissions/ownership issues with the parent directory where the lock file will be created. Look at your config file and inspect the $meshchat_path variable to determine where the lock file will be written. If this is on a node rather than a Raspberry Pi, then look at the amount of free space on the node (you might be out of space without knowing it). See if there are any download files and such that you have on the node that don't need to be there. Also insure that the directory specified by $meshchat_path actually exists. 

Good luck, 
WT0F

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer