You are here

Tp-link CPE510(EU) v1.1 reboots to pharos after TFTP download

2 posts / 0 new
Last post
G7SAI
Tp-link CPE510(EU) v1.1 reboots to pharos after TFTP download
Hi, I am trying to get AREDN firmware onto a couple of CPE510 units but after TFTP transfer completes and the Unit restarts it is still running Pharos. I have tried stable and nightly. Can anyone suggest where I might be going wrong? My next step will to be to fit a header and try the serial interface. Thanks & 73 Ellis G7SAI
AE6XE
AE6XE's picture
Confirm this is the image
Confirm this is the image attempted to load?:
http://downloads.arednmesh.org/snapshots/trunk/targets/ath79/generic/are...

Any other details are helpful:
1) did you use a dumb switch between laptop and CPE510?
2) what tftp program are you using and on windows or linux?   
3) show the log messages of tftp command typed and interaction?
4) any other detail?

It can be a trivial thing that another set of eyes can spot.  We need to see all the little details and  hardware setup to eliminate the possibilities one at a time.

Joe AE6XE

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer