You are here

Beta's break Charts

10 posts / 0 new
Last post
AB4YY
Beta's break Charts

A couple of us have noticed that the recent beta seems to break the Charts function and this has been verified on a NanoBridge, MikroTik SXTsq as well as Meraki MR16.  (FW ver. 405-49017f4)

73 - Mike, AB4YY

K6CCC
K6CCC's picture
Break in what way?  That
Break in what way?  That might have been useful information.

With that said, I can answer.  Tested on several of my nodes.  The chart appears to be normal when it is displaying the average for all connected nodes.  However the dropdown to select which station is not.  At home, I have three nodes that talk to each other on 2 GHz.  On the hAP, it only displayed the MAC for one of the other nodes.  On the USB150, it only displayed the IP address of one ot the other nodes, and on LHG 2nD it listed one IP and the name of one node.  I looked at several other nodes that only have a single RF connection.  They all just showed an IP address.  All nodes that I tested were correctly showing node names on the Mesh Status listing.
 
AB4YY
Realtime showing "average
  • Realtime showing "average signal for all connected stations" may work okay as I see a moving graph.
  • Realtime dropdown only shows a single MAC and no node names.  I would expect to see three node names.
  • Archive shows only a single MAC in the dropdown and no graph data.

- Mike
 

K6CCC
K6CCC's picture
Here you go...

All of my nodes are running Nightly 405.  Looking at charts is not something I look at very often, so I can't tell you when the problem started.

These commands were on a hAP ac that has two RF connections.  The MAC listed in the first command is one of them - the RB-LHG-2nD-XL
 

Current Neighbors    LQ NLQ TxMbps    Services

AI6BX-2-QTH   (tun,wan)   100% 100%      
K6CCC-RB-LHG-2nD-XL   100% 100% 115.6    
K6CCC-RocM3-1   (dtd)   100% 100%      
K6CCC-USB150-Portable   100% 100% 58.5    
 


root@K6CCC-hAP-at-Home:~/snrlog# ls -la
drwxr-xr-x    2 root     root            60 Jun 18 10:03 .
drwxrwxrwt   17 root     root           560 Jun 23 07:55 ..
-rw-r--r--    1 root     root             0 Jun 18 10:03 b8:69:f4:b8:5a:eb-
root@K6CCC-hAP-at-Home:~/snrlog# 

root@K6CCC-hAP-at-Home:~# /usr/local/bin/snrlog
/usr/bin/lua: /usr/local/bin/snrlog:97: attempt to perform arithmetic on field 'lastseen' (a nil value)
stack traceback:
        /usr/local/bin/snrlog:97: in function 'create'
        /usr/local/bin/snrlog:354: in main chunk
        [C]: ?
root@K6CCC-hAP-at-Home:~#

Hope that helps..
 

K6CCC
K6CCC's picture
If you mean the file with the
If you mean the file with the MAC as part of the filename, note that the listing shows filesize as zero.
 
K6CCC
K6CCC's picture
No snr.dat in /tmp  
No snr.dat in /tmp
 
AB4YY
Right now only my location

Right now only my location has the Beta as it was removed from the other nodes and the Release version installed.

Right now I have Beta FW ver. 405-49017f4 on a Meraki M16 and a NanoBridge.

Looking at the NanoBridge with ssh and doing a "ll" I see this:

-rw-r--r--    1 root     root             0 Jun 22 07:23 24:a4:3c:fc:53:69-

whereas on a node with the Release FW version the MAC is followed by the node name.

- Mike

 

AB4YY
RE: /usr/local/bin/snrlog

RE: /usr/local/bin/snrlog

I just ran that, a few times:
 

root@AB4YY-NanoBridge:~# /usr/local/bin/snrlog
root@AB4YY-NanoBridge:~# /usr/local/bin/snrlog
root@AB4YY-NanoBridge:~# /usr/local/bin/snrlog
root@AB4YY-NanoBridge:~# /usr/local/bin/snrlog
/usr/bin/lua: /usr/local/bin/snrlog:97: attempt to perform arithmetic on field 'lastseen' (a nil value)
stack traceback:
        /usr/local/bin/snrlog:97: in function 'create'
        /usr/local/bin/snrlog:354: in main chunk
        [C]: ?
root@AB4YY-NanoBridge:~# /usr/local/bin/snrlog
/usr/bin/lua: /usr/local/bin/snrlog:97: attempt to perform arithmetic on field 'lastseen' (a nil value)
stack traceback:
        /usr/local/bin/snrlog:97: in function 'create'
        /usr/local/bin/snrlog:354: in main chunk
        [C]: ?
root@AB4YY-NanoBridge:~# /usr/local/bin/snrlog
/usr/bin/lua: /usr/local/bin/snrlog:97: attempt to perform arithmetic on field 'lastseen' (a nil value)
stack traceback:
        /usr/local/bin/snrlog:97: in function 'create'
        /usr/local/bin/snrlog:354: in main chunk
        [C]: ?
root@AB4YY-NanoBridge:~#


 

AB7PA
Submitted a fix for this

Submitted a fix for this issue to the code repository on github.  Pending review by the development team, this should be available in a forthcoming Nightly Build.

UPDATE: This fix is now in Nightly Build 433 and newer going forward.

K6CCC
K6CCC's picture
Nightly 433 fixed it
Updates all 14 nodes to Nightly 433 and spot checking a few of them and this problem is resolved.
 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer