You are here

Will be in Mayaguez this week! -- Need to know about current nodes, Pronto!

3 posts / 0 new
Last post
KX5DX
Will be in Mayaguez this week! -- Need to know about current nodes, Pronto!
Muchachos,
I will be visiting family this week and Im planning on taking a couple of nanostations that I'm not using here. The Plan is to deploy two nodes, 2.4 and 5GHz in Alturas de Mayaguez, facing north towards Cerro Atalaya(the only line of sight available). 

I see that KP4CA has some nodes in Añasco, and depending on elevation, that could be a doable.

 
KP4CA
KP4CA's picture
Hi Carlos:

Hi Carlos:
If you are going to be on Alturas de Mayaguez, your best shot is Cerro Las Mesas or my nodes in Anasco. The node in Anasco, as this moment, is only in 2.4ghz, -2 at 10mhz facing your location.  In Cerro Las Mesas there are 3 sector antennas in 5ghz from WP4QZH.  Just scan in 10mhz and you will see the channels.    Also in Las Atuneras there 2 nodes.  One in 2.4ghz and oher in 5ghz.  All this nodes are in the Puerto Rico AREDN mesh.  Welcome to the island.

KX5DX
Carlos,
Carlos,
I was able to get the Unifi network and Protect cameras going at my parent's house, but unfortunately, I didn't have enough time to get to the AREDN install. 
The only LOS from the roof is towards Atalaya. I could possibly set one up at KP4B's, with LOS to Las Mesas. I will let you know once I have an update.
 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer