Hi friends.
How do you do? I hope you stay all well. I've my hAP bricked... I needed to change LAN config from 1 IP to 5 IP and it gave me errors.
So I've resetted config... I've entered new node name and password and it reboot itself. After that, no sign of life!
when I power on the hAP it blinks all leds, then only power led stay on and cannot reach any port... port leds always off.
It seems not able to load any OS. I've tried to load original RouterOS with Mikrotik Netinstall with no success.
Have I broken it in a definitive way????
Anyone can help me?
:-(
73 de Leo IZ5FSA
How do you do? I hope you stay all well. I've my hAP bricked... I needed to change LAN config from 1 IP to 5 IP and it gave me errors.
So I've resetted config... I've entered new node name and password and it reboot itself. After that, no sign of life!
when I power on the hAP it blinks all leds, then only power led stay on and cannot reach any port... port leds always off.
It seems not able to load any OS. I've tried to load original RouterOS with Mikrotik Netinstall with no success.
Have I broken it in a definitive way????
Anyone can help me?
:-(
73 de Leo IZ5FSA
https://wiki.mikrotik.com/wiki/Manual:Netinstall
Good luck
Denis
Using NetInstall from Mikrotik I cannot reach the device. USing PXEserv (instead) yes... It load RB.ELF file but, unfortunately, device remain "stopped" and no eth led port flash even I attach a PC. I've reloaded rb.elf many times but no restart at all. Do I trash device out?
Leo, IZ5FSA
Denis
First time and goal... I was able to reach device on eth2 at 192.168.1.1
Upgraded firmware and again connected to 192.168.1.1
Change password and after reboot I change my eth0 to dhcp and reach for final setup localnode.local.mesh.
Probably I make something wrong... but now all is ok.
Thanks for your info... will be useful to come back to RouterOs.
73