You are here

MikroTik hAP upgrade to v3.20.3.0 firmware

3 posts / 0 new
Last post
K8MWS
MikroTik hAP upgrade to v3.20.3.0 firmware

My MikroTik hAP tunnel server stopped working 2 nights ago.  On investigation I found that the firmware was now updated to ​v3.20.3.0.  A simple reboot restored the tunnel connections, so no problem there.  The head-scratcher is that there are just two of us with the password to this device, and neither one of us initiated a firmware upgrade.

This seems like a silly question, but is there something in the firmware that would cause a MikroTik hAP router to automatically upgrade itself to the ​v3.20.3.0 firmware?   

Mark  K8MWS

AE6XE
AE6XE's picture
upgrading a node is is a
upgrading a node is is a manual process that requires physical access (tftp upload) or admin password (sysupgrade).     

Joe AE6XE
K8MWS
Sounds like I need to change

Sounds like I need to change my password if somebody connected to our mesh is taking it on themselves to upgrade other people's nodes...
Mark. K8MWS

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer