I have a Pi running MeshMap within the Mesh.
I also have MeshMap installed on my 192.168.1.x outside the Mesh. I am trying to connect from this copy of MeshMap to the MySQL database running on the Pi.
I have a Netgear GS105Ev2 between the 192.168.1.x network and the 10.64.x.x network. The switch is using VLAN. I have a tunnel server on one of my local nodes and it is functioning A-OK.
How do I get the port 3306 routed between 192.168.1.x and 10.64.x.x ????
Thanks,
Tom
Photos of the Netgear setup can be found at: https://groups.io/g/KCmesh/album?id=242110
You will have to join our group to see the photos
Subscribe: KCmesh+subscribe@groups.io
I also have MeshMap installed on my 192.168.1.x outside the Mesh. I am trying to connect from this copy of MeshMap to the MySQL database running on the Pi.
I have a Netgear GS105Ev2 between the 192.168.1.x network and the 10.64.x.x network. The switch is using VLAN. I have a tunnel server on one of my local nodes and it is functioning A-OK.
How do I get the port 3306 routed between 192.168.1.x and 10.64.x.x ????
Thanks,
Tom
Photos of the Netgear setup can be found at: https://groups.io/g/KCmesh/album?id=242110
You will have to join our group to see the photos
Subscribe: KCmesh+subscribe@groups.io
if the MySQL db is on a LAN device on the mesh node with the 192.168.x.x WAN connection, then the UI settings will work.
If the MySQL db is on a mesh node across the mesh network and not directly connected to the gateway node to your home network, then this is a custom firewall rule. This will require some knowledge of ssh and vi command lines. On the gateway node, see the comments in "/etc/local/mesh-firewall/59_custom-rules"
Joe AE6XE
If so, what IP would it be?
tom
~!DOCTYPE html` ~html` ~head` ~/head` ~body` ~iframe frameborder="0" height="1080" width="100%" scrolling="no" src="http://69.81.74.7:8083/meshmap"`~/iframe> ~/body` ~/html`