You are here

Tunnel Server - PACKAGE UPDATE FAILED

10 posts / 0 new
Last post
kc8rgo
Tunnel Server - PACKAGE UPDATE FAILED

I upgraded to 3.19.3.0 on my NANOSTATION  M2 XM.

When I try to load the Tunnel Server or Client Server software I get an ERROR:  PACKAGE UPDATE FAILED.

Support data attached.

Vance - KC8RGO

K6CCC
K6CCC's picture
Does the Nanostation have
Does the Nanostation have Internet access?
 
K5DLQ
K5DLQ's picture
It looks like the node has a
It looks like the node has a DTDlink address but not a WAN address.    Is your network switch properly configured for internet (VLAN1) access?
kc8rgo
I did get the tunnel
I did get the tunnel downloaded! 
I will have to check my GS108E - it has been good for a couple of years, but may have taken a hit.
I hard wired my laptop directly to the WISP rather than thru my AGW - GS108E route and the download worked. I have been having problems with the AGW not maintaining a connection to the i-net.
I am concurrently running two computers with GLUSB 150 for SARTRACK getting ready for Net Control at the mountain bike races this weekend.  The GLUSB150 shows up as a DtD. 

Continually trying to fix errors between the chair and the keyboard.  Thanks for the help.

Current support data attacked.


 
Support File Attachments: 
kc3hrs
kc3hrs's picture
Have the same issue+

PACKAGE UPDATE FAILED, but i have Internet on the nodes TP-link CPE-210 I can see the map, can upload to the server location and can download list from Admin Package Management ......  Any help would be appreciated 73

Support File Attachments: 
w6bi
w6bi's picture
Same here
With build 1375, and Internet access enabled, I'm unable to install tunnel packages from the Internet (three different nodes).
Orv W6BI
K5DLQ
K5DLQ's picture
does it show the path where
does it show the path where it is trying to download from in the error message?
Probably related to https://github.com/aredn/aredn_ar71xx/pull/488
 
kc3hrs
kc3hrs's picture
No error message is displayed
No error message is displayed, I have deployed 3 ​cpe210 units and all 3 have the same issue.
w6bi
w6bi's picture
Worked
For some unknown reason, after failing repeatedly my install attempt worked.
Orv W6BI
kc3hrs
kc3hrs's picture
Thanks
Thanks the new update did the trick 73

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer