You are here

Node fails to update from 3.16.1.1 firmware

3 posts / 0 new
Last post
NH6WR
Node fails to update from 3.16.1.1 firmware


I have successfully updated all of my nodes to 3.19.3.0  except for one that after the attempt keeps returning to 3.16.1.1.

I believe the hilltop node is a NanoBridge M5G22 .    I have tried several times to do the upgrade but after  uploading of the software the node will go offline as normal but will return  with the old 3.16.1.1.     I have tried to upload a fresh  file of 3.19.3.0 and still no go,  always returns with 3.16.1.1.     Any ideas?

k1ky
k1ky's picture
Upgrade from 3.16.1.1 Firmware
Just as a precaution, I like to step up from 3.16.1.1 to 3.16.2.0 first.
Also as always, make sure you have removed any Tunnel or MESHChat modules that may be installed.
Always reboot before upgrading to start out fresh.
 
NH6WR
That did the trick!  upgraded
That did the trick!  upgraded to 3.16.2.0    then to  3.19.3.0     
Thanks-
NH6WR

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer