You are here

NanoStation Loco M5 (XW)

5 posts / 0 new
Last post
K7CTM
NanoStation Loco M5 (XW)

After flashing a NanoStation M5 (XW) I was unable to connect to the radio directly via the ethernet, I was able to connect to the radio via wifi. 

I accessed the AREDN setup entered my call, password and Distance.  When I try and save the settings it came back "Configuration not saved.  parameter DTDMAC in file*_setupdefault does not exist".

I'm unsure what to do next.  Any ideas? 

Thomas Robbins - K7CTM




 

K5DLQ
K5DLQ's picture
click the RESET TO DEFAULTS
click the RESET TO DEFAULTS button and try again.
K7CTM
RESET TO DEFAULTS
That was one of the first thing I tried but no luck.
K7CTM
RESET TO DEFAULTS

I have been able to access the radio from the ethernet on 192.168.1.1.  I entered Call, password and distance but when I try to save the changes it comes back "Configuration not saved.  parameter MAC2 in file '_setup.default does not exist".

Not sure what to try next.  Any ideas?


 

K7CTM
GOT IT WORKING
Down loaded and loaded upgrade and it working fine now.

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer