You are here

new HAP-ac RB592Ui-5ac2nD-US will not accept latest .elf file

13 posts / 0 new
Last post
K3MMB
new HAP-ac RB592Ui-5ac2nD-US will not accept latest .elf file
Got shiny new hap-ac today.  Tried the windows trick to load aredn, it failed. switched to RPI and dnsmasq method .
Multiply attempts fail to load the current nightly build elf file.

Cold stated hap-ac load most current firmware (6.43.3 (2018-Oct-05 13:12). 

attached file has dhcp log from fail elf load and latest info on stock firmware.

any ideas??
regards
mike



 
K5DLQ
K5DLQ's picture
RB952-5ac2nD-US is the

RB952Ui-5ac2nD-US is the supported model.   Not RB592....
 

K3MMB
would you believe a typo

Being a very senior citizen, I do not see so good and type even worse

MODEL NUMBER = RB952Ui-5ac2nD-US
regards
 

AE6XE
AE6XE's picture
mike, this looks more like

mike, this looks more like there is a cable connector problem or something -- getting errors trying to transfer the file.    It looks like the device isn't getting the image to then say it's compatible or not.   Try different switch or cable, make sure nothing is damaged on the pins in the RJ45 connectors both male/female.  

Does it boot with RouteOS and can be accessed with a browser, to confirm the hardware is working out-of-box?

Joe AE6XE

K3MMB
Joe, out of the box connected and using
it now to post this response.

Tried the RPI things more times than I count and the windows as well.

Additional info, the windows attempt reports:

10:22:26 PM ROOT=C:\Users\Mike\Downloads\mikrotik\
10:22:26 PM DHCPd 192.168.1.10:67 started...
10:22:26 PM TFPTd 192.168.1.10:69 started...
10:22:27 PM HTTPd:80 started...
10:22:42 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:42 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:42 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:43 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:43 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:43 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:43 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:43 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:44 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:44 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:44 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:44 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:44 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:45 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:45 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:45 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:45 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:45 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:46 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:46 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:46 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:46 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:46 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:47 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:47 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:47 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:47 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:47 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:48 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
10:22:48 PM DHCPd:unrecognised bootp packet, MAC:CC-2D-E0-FC-16-51, 0
while the RPI still says failed sending the elf file.


this post done with windows laptop (that failed upload) connected to internet port via netgear AP to my comcast, laptop to port 2 of hap

no clue as to what I manage to get wrong over and over...

I really appreciated you support, I know I must be a PIA

Best Regards
Mike
 
K3MMB
FINALLY .... got it to load elf then 503...bin
Got it loaded after about 9 hours today.

RPI never worked
Ray's pserver method never worked

I switched to:
TFTPD32 and TFTPD64 are copyrighted 1998-2018 by Philippe Jounin (philippe@jounin.net) and released under the European Union Public License 1.1 (see either the help file or the file EUPL-EN.pdf for the full text of the license)
Official site: http://tftpd32.jounin.net

after I figured out the setup and about 20 retries, the elf file loaded and everything else went as defined in loading mikrotik. It acted like the new hap didn't like the dhcp conversation on the boot sequence. I have no idea why it decided to play nice, but sure am glad it did.

The system is doing usb power pass through. To tired to mess with other things tonight.

Thanks for your support

Best Regards
mike
KK6RAY
Glad it worked
Yes, the Mikrotik bootp protocol uses a different standard. I posted a video here on how to flash using tiny PXE server.
K3MMB
Tried your pxe server solution but
Did not work, tried rpi and dsnmasq, did not work,tried  tftp64, it took all day and most of the night. Tftp64 finally did load the file. After that things were fine. The new node is up and running just fine.

For or some reason this unit simply would not take the elf file.

regards
mike
 
KK6RAY
Interesting. Did you update
Interesting. Did you update the config.ini file to enable rfc951, under the dhcp brackets? It took me a few hours of research to get that step, otherwise it would give some error about unrecognized bootp packet.
kd4nfb
I know this is old, but this
I know this is old, but this was my issue. The rfc951 option. Thank you!
N5MXI
N5MXI's picture
1st time was the charm (Mikrotik hap ac)

I loaded my Mikrotik hap ac lite and was successful on my first attempt using the Windows method. I ran the Youtube video done by Ray KK6RAY on my tablet and just followed along step by step. I did have to pause an replay a few segments but overall it was fairly easy. Thanks, Ray. Now looking forward to what I can do with this new little node.
David - N5MXI

ki5edt
I have a Hap ac coming . I
I have a Hap ac coming . I hope I have the same luck with Windows. I have 3   5 ghz and 4 old Ham-nett nodes I want to try to connect them Dtd. Has anyone out there done this. All running the same ssid.
Doug
K3MMB
SEE - Norton WiFi Privacy and Aredn nodes post
check out my post on VPN blocking load

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer