slideshow 1 slideshow 2 slideshow 3 slideshow 4 slideshow 5 slideshow 6 slideshow 7 slideshow 8 slideshow 9 slideshow 10 slideshow 11

Alerts

There are NO alerts at this time. 

News


AREDN Nightly Build Update


Now we have shipped 3.25.5.0, the nightly builds will be a little different. Before we had just a single nightly build, but for the foreseeable future there will be two:
  • a nightly build, and
  • a babel nightly build.
The traditional nightly build will continue to include bug fixes and contains both Babel and OLSR. It will be the base for future Release builds until OLSR is removed.
 
The babel nightly build has no OLSR and should be considered experimental (i.e. don’t put it in places you don’t have easy physical access to). These images are identified by having “babel-” prefixed to the nightly build number. Using this has the following implications:
  • Babel-only nodes will not know about OLSR-only nodes.  So prior to trying this nightly build, ensure that all the nodes that communications must be maintained with are running at least production build 3.25.5.0, which is dual-protocol.
  • LUA support has been removed and is no longer used by the AREDN software. Be aware that Lua applications such as MeshChat are not currently supported.

Reverting procedure

If you think you might want to revert to the production release, ensure that you’ve done a backup...
Read More
Updated date: Friday, May 9, 2025 - 20:54


AREDN Production Release 3.25.5.0

 

Major Enhancements

This release heralds some major changes with AREDN® and we encourage you to take a moment to read about them below,
 

Babel Routing

The AREDN® team is introducing Babel as a replacement for the older OLSR routing technology. OLSR has served us well, but has many problems we’ve had to live with over the years. Babel, on the other hand, has many qualities which make it a good fit AREDN®. First, it’s a loop free protocol so, regardless of how the network is changing, routing loops will never form in the network. Second, it has a   substantially lower traffic overhead so is good for slow, low bandwidth links. Third, the protocol adapts to the differences between wired, wireless, and tunneled links. Fourth, as a layer-3 routing protocol, it integrates easily with AREDN®. Fifth, it’s highly configurable. Finally, it’s simple. This video is a great primer on Babel.
In this release Babel and OLSR will run side-by-side, with Babel routing used where available, and OLSR used otherwise. No configuration is necessary. You will see a three-stars symbol on neighbors which support Babel, and a new three-stars symbol on...
Read More
Updated date: Wednesday, May 7, 2025 - 12:28


AREDN Release Candidate Available


Nightly build 20250415 has been designated the release candidate for the next production release.

In it the AREDN® team is introducing Babel as a replacement for the older OLSR routing technology.   It's been seen to improve network stability and throughput.  In this release Babel and OLSR will run side-by-side, with Babel routing used where available, and OLSR used otherwise.  Already 25% of the nodes on the network are running a Babel-enabled nightly build and we've seen and heard anecdotally of significant improvements in network stability.

Additionally this release adds PtP (point to point) and PtMP (point to multipoint) RF modes to complement our existing AdHoc mode.  We’ve see notable throughput and latency improvements when using these modes, especially with 802.11ac devices. This  holds true even when mixing radios from different manufacturers.

Assuming no big issues arise (and it's been very calm the last couple of months of nightly builds) we expect the production release to occur early next month.

We believe this is a great release candidate.  But we encourage you to install it on your nodes where you can; we want to hear from you what you think of it!

The AREDN development team
 
Updated date: Wednesday, April 16, 2025 - 09:09


New Experimental Radio Modes and SSID


Following on the heels of the inclusion of the Babel routing protocol to the AREDN software is another significant enhancement: nightly build 20250219 adds PtP (Point to Point) and PtMP (Point to MultiPoint) configurations. These protocols can be found in the Radio section of the AREDN UI:

 

 

Here's a brief explanation of each of them:

 

  • Mesh PtMP: This makes a node act like your common access point, where Mesh Station nodes can connect to it, but not to each other, and the Mesh PtMP can only connect to Station nodes.

 

  • Mesh PtP: Same as above except only a single Station is permitted to connect, specified by a MAC address.

 

  • Mesh Station: Can connect to a Mesh PtMP or, if it’s the authorized node, a Mesh PtP. It cannot connect to anything else.

 

The new modes also require a new SSID. This changed SSID is a necessary by-product of how these modes are implemented. Our current Mesh uses the WiFi Ad-Hoc radio...

Read More
Updated date: Wednesday, February 19, 2025 - 12:37

Pages

Announcements


19.07 Release Status Update

The upcoming release of many new devices, bug fixes, and capabilities still has a few issues being worked out:

1) The OpenWRT release that AREDN is based on, recently published another release candidate rc2, and there is a rc3 in the pipeline. This means we are still days/weeks away to see the OpenWRT official release.
2) There are 2 identified issues so far on Rocket M5 XW and Nanostation M5 XW devices still being worked.
3) Many models do not yet have any know testing to confirm all is working.

How can you help?   Check the status here:

https://drive.google.com/file/d/1IyDD_gPC4LLtZGERDQhS8Ix7EDiNjK12/view?usp=sharing

If you have a device that has not yet been tested, please down load the image and give a try here:

https://drive.google.com/drive/folders/1Pm466OqLPTARUuh_ux3xSoD2123H5EOw?usp=sharing

Joe AE6XE


Call for Code 2019 Global Winner Announced

Prometeo was announced the Call for Code 2019 Global Winner on Saturday, October 12, 2019 at the award ceremony held in New York City. After intense judging from IBM, the David Clark Cause, the United Nations Human Rights Office, the American Red Cross, and other subject matter experts in the first round, the eminent judges ranked the five finalist teams and selected Prometeo as the winning solution.

Prometeo not only wins the 200,000 USD grand prize, but open source project support from The Linux Foundation, meetings with investors and mentors, and solution implementation support through IBM's Code and Response initiative. The team also won the People's Choice award on October 4, where thousands of voters chose Prometeo as their favorite solution.

In his 33-year career as a firefighter, Joan Herrera has battled thousands of wildland fires and suffered the headaches and breathing problems that...

Read More

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer