slideshow 1 slideshow 2 slideshow 3 slideshow 4 slideshow 5 slideshow 6 slideshow 7 slideshow 8 slideshow 9 slideshow 10 slideshow 11 slideshow 12 slideshow 13

Alerts

AREDN highly recommends upgrading to AREDN security release v3.22.12.0
For more information see the Latest Docs page

News


Happy Mesh Year!   Yet another network test!


"PARDEN" the interruption!  October's Meshoween network test was so successful that, we've decided to celebrate with another one at the end of the year.  We'll celebrate New Nodes Eve and then Happy Mesh Year!

Seriously, this is an opportunity to stress the network again after the router storm mitigation patch has time to promulgate throughout the network.  Meshoween also revealed an issue with the performance of the Mesh Status page when the node count got high.  Both these patches were published in nightly builds in early November.  If your node's running a nightly build later than that, you should be good to go.   

The WWL - "World Wide Linkup" will start at 000Z on 1/1/2022  (afternoon of the 31st for the U.S.) and last at least 4 hours.  If you've brought up a tunnel that you don't normally use, feel free to drop it anytime after 4 hours.

So crank up those tunnels and be on the lookout for network wierdnesses.

Updated date: Wednesday, December 29, 2021 - 19:22


Meshchat Usage Poll


We are considering how the future version of AREDN mesh network software might affect the use of the Meshchat application.

Please help us by responding to the Meshchat poll here.

Updated date: Tuesday, December 21, 2021 - 10:22


Report on Meshoween 2021 network test

Note - this report is written from a Southern California perspective. Depending on your location, as they say YMMV!

During the test the node count on the linked networks locally rose to around 1,090.  N2MH's N2MH-Hub saw 1428, most likely a record for an AREDN network.

Observations:

As we hoped, network storms never appeared from our West Coast point of view, and none have been reported to date.  Network traffic was not substantially higher than normal. Using KN6PLV's Mesh Monitor, messages per second were averaging about 600 before the test.  During the test it hovered closer to 700. Most of the increase in traffic was due to OLSR routing broadcasts, which each node has to handle.

As we expected, older devices struggled. Many wound up with a load significantly greater than 1 (which is a full load for a single-CPU device like these), indicating their CPUs were struggling to keep up with their pending processes.  Ssh'ing into a few of them and running top showed that with node counts around 1,000, loads of around 4-5 were seen.  

Things we didn't expect:

While the slower nodes struggled with displaying UI pages, they were usually still able to pass traffic.  But occasionally that older hardware bogged down so much that it couldn't.  Perhaps some effort should be made to prioritize traffic handling...

Read More
Updated date: Sunday, October 31, 2021 - 15:17


Meshoween test results

We've wrapped up the Meshoween network abuse test  :-). 
If you participated and have any specific observations, please pass them along to me (orv.beach@gmail.com) and they'll be rolled them into the report on the test. 

tl;dr - it went pretty well - a few surprises.

Updated date: Saturday, October 30, 2021 - 20:55

Pages

Announcements


Call for Code Finalists Announced


#CallforCode 2019 five global finalists announced. Vote for your favorite #opensource tech solutions for natural disaster response and recovery. Pick the People's Choice Winner and get a chance to consult with a VC expert: ibm.biz/peoples-choice


Automated Mesh Map

Our resident network mapper and AREDN developer Eric KG6WXC just published a page describing his mapping program. His Automated Mesh Map allows hobbyists who have experience in Linux/Apache/SQL to collaborate while gaining metrics in their desired nodes. It has a become a “go to” tool for monitoring the status of the networks. Groups who start setting up their own AREDN Networks also get a copy of the map to monitor their progress.
You can get all the details on his page at SkySilk Cloud Services User Spotlight.

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer