slideshow 1 slideshow 2 slideshow 3 slideshow 4 slideshow 5 slideshow 6 slideshow 7 slideshow 8 slideshow 9 slideshow 10 slideshow 11 slideshow 12 slideshow 13 slideshow 14

Alerts

AREDN highly recommends upgrading to AREDN security release v3.22.6.0
For more information see the Latest Docs page

Announcements


Installing AREDN on Mikrotik using Windows


The new Mikrotik devices supported by AREDN are great, but the installation procedure for loading AREDN firmware on them using a Linux computer has been intimidating to many in our community.

There is no reason to fear any longer.

Ray KK6RAY (formerly KM6WUH) devised a procedure to install AREDN firmware on Mikrotik using a Windows computer. The widespread familiarity with Windows and fewer steps in Ray's procedure should greatly reduce any anxiety you may have about trying a Mikrotik unit.

Ray produced a 20-minute video to demonstrate the installation procedure. The video is on YouTube here.
In addition to a Windows computer, an AREDN-supported Mikrotik device (see Supported Platform Matrix), and an Ethernet cable, you will need:

Read More


hAP ac lite 5GHz LAN Access Point


Joe AE6XE reports that the  Nightly Build available on Nov 28, 2018 will now include capability to use both wireless cards in the hAP ac lite device.  The 2GHz is the Mesh RF and now the 5GHz is a standard part 15 Access Point bridged with the LAN network.   This means that LAN mesh devices can be both on wifi and physically on the Ethernet port, both allocated the IP addresses assigned for the LAN network.   

For now, the 5GHz channels overlapping Doppler Radar are not selectable -- the "DFS" channels.   This will be an add on later to integrate in these channels. 

The code changes that make this possible, also make the following capability readily doable and are in the pipeline for the nightly build:

1) Activating the Nanostation XM devices' secondary Ethernet port to be standard AREDN functionality (and daisy chain devices with poe passthough).
2) Ability to enable/disable the following for single wireless card devices -- only one active on the wireless at a time or both disabled:
     a) mesh RF as we know today
     b) LAN Access Point for...
Read More

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer